Medical Imaging Convention

15 - 16 November 2022
Olympia London


 Oncology ConventionCPD Member

EZone Space Only Stands

Subpage Hero

EZone Space Only Stands

Space Only Stands

Exhibitors who have booked a Space Only stand will have an area of empty space on the show floor. Nothing is included in this space, and you should appoint a stand contractor to lay flooring, build walls and design your stand.

Exhibitors are responsible for ensuring that their contractors receive a copy of this ezone. All designs, construction etc must comply with the organisers, venue and Local Authority deadlines and rules and regulations.

PLEASE NOTE: Exhibitors must notify Tim Filmer as soon as possible with the names of their stand contractor. If you are in the process of looking for a contractor, Roar B2B offer an In-House Design and Build Service for Exhibitors. As the event organisers, we are uniquely placed to understand your needs, keep things simple and deliver a trusted service. Please get in touch to start your design and planning journey. Contact Us here 

Due to Covid19, regulations around the planning, design, layout and management of your space during build up, break down and open periods will need to be updated.  Further information is detailed below and additional measures proposed by event industry associations being enforced by Roar B2B Ltd are explained here

Important Information

People are important, saving lives is a must. It is everyone’s duty and responsibility to ensure when working on the event, they evaluate their involvement, the potential risks involved and in particular at this time, the risk of transmission of Covid 19.

The above information is subject to change, dependant on the updates from the UK Government and SAGE. Each Venue may also introduce separate measures which will also have to be implemented. Should you have any queries, please contact the Organisers or our Health & Safety Advisor.

CDM Regualtions & Site Rules

Please find our CDM Regulations here and ensure that everyone coming onsite has seen these.

Site Rules 

Each exhibitor must read the site rules before coming onsite. It is a condition of the Venue and Roar B2B Exhibitions that you fully understand your onsite responsibilities. The Site Rules below are in addition to the specific site rules relating to this event:

  • Vehicle access into the halls and or a CDM site has to be approved by the Venue/Principal Contractor (organiser) for the event.
  • Remember the speed limit in the halls is 5MPH.
  • Plant and Site vehicles (including forklifts, pickers, and site vehicles) may only be driven by appointed contractors who have supplied a relevant in date licence.
  • Compliance with NEC Traffic rules at all times
  • All forklift and vehicle movement within the halls and outside the halls, that is directly linked to an event must be co-ordinated and managed safely by the Principal Contractor (organiser) of the event.
  • Emergency gangways should be maintained to allow cleaning tractors, forklift movement and emergency access/egress at all times. Emergency gangways must be clearly identified and communicated to all personnel working within the halls/CDM site
  • Compliance with Site Rules, eGuide, H & S legislation, Covid19 All Secure Framework and CDM regulations is required at all times
  • Only authorised access is permitted into the exhibition halls. All personnel working within a CDM site must be inducted and informed of the Site Rules.
  • Appropriate management and safe methods of working at height is required at all times
  • All personnel are required to wear high visibility clothing and appropriate footwear during event build up and breakdown periods.
  • PPE. You must bring the appropriate personal protective equipment and clothing with you, on site, to do your job before you start work– including appropriate footwear. This equipment will be worn without fail when required.
  • All Hot Work requires a hot work permit from the venue
  • All contractor accidents, incidents & near misses must be reported immediately to the organiser
  • Work tidy – Maintain good housekeeping at all times and dispose of all waste in an appropriate manner
  • Smoking (including e-cigarettes) is only allowed in designated smoking areas
  • Anyone suspected of being under the influence of drugs or alcohol will be ejected
  • No one under the age of 16 is allowed on site during the build-up and breakdown.
  • The venue has access to all CDM sites at all times

Submitting Plans

Failure to submit your proposals by 30th July means that your stand could face delays in obtaining approval. The Local Authority could prohibit your company from exhibiting at the show.

Below are the compulsory forms that you must submit as a Space Only exhibitor. Stand plans will need to be submitted to Tim Filmer by 30th July

  • Construction Phase Plan
  • Method Statement
  • Public Liability Insurance Certificate
  • Risk Assessment
  • Stand Plans inc a 3D visual and elevations to include dimensions and maximum height of the stand


Scaled technical plans are available from the operations team showing the location of the floor ducting and any columns; please request these from the operations team. Please remember to include your company name and stand number.

Pre-Tenancy Stand Build Planning

It is vitally important you manage and schedule your material deliveries, build, stand dressing including product displays to ensure you can meet the times available. The event build has been created to reduce the number of people in the halls and space available.

Please include the following as part of your planning process:

  • Revisit your plans and documents. What is the minimum number of staff who can build the stand safely and within the time constraints? We would advise where possible, simplifying the designs to enable this. 
  • Submit a new Risk Assessment and Method Statement, taking into account how you will manage and minimise the risks to yourselves and others, from Covid-19 during the build and break phases.
  • Check your Insurance. Is your ELI and PLI covering you, your staff and 3rd parties, sufficiently? If in doubt, contact your broker.
  •  Are you using overseas contractors? If so, it is YOUR responsibility to prove, in advance, that they have been in the country for more than two weeks prior to site, and have quarantined since their arrival where Home Office regulations require it.  If this cannot be proven, they will be refused access to site. 


Each space Only stand will be allocated a temporary material holding area in a designated gangway adjacent to the stand. It is important that these areas do not over spill into other areas. You will be sent your allocated area one month prior to the build dates. Please ensure deliveries are programmed accordingly based on space allocated.

Support venue and official contractor services. Please ensure all stand services requirements i.e. electrical, water and waste etc are ordered and confirmed in advance. Limited service desks will be available and potential queuing delays may occur.

Staff safety induction and accreditation will be carried out in advance pre tenancy. NO accreditation will take place in the halls. Please ensure all personnel details are completed to ensure there are no delays for you building the stand. This includes any sub contracted personnel.  Badges should be ordered for all staff working during build up and break down in advance of the event.  All registered parties will be sent a 'Print at home' badge to access the event halls.

Stand Design

Based on your stand square meterage and subsequent category and allocated build time, please consider your proposed stand design and work involved to ensure you can build and complete the stand construction within these times.

In addition. Please also ensure points under social distancing are considered and schedule tasks and team arrivals so as to minimize the number of people on your stand at any one time.

Please consider the following when planning your stand:

  • All stands must comply with the regulations as set out in the eGuide.
  • Stand Numbering: All space only exhibitors must display their company name and stand number prominently on their stand so that they can be viewed from each approaching gangway. This will assist visitors in locating their position within the hall and finding the stands they wish to visit.
  • Travel Distance: Adequate means of escape must be provided from all stands. The travel distances from any part of the stand to the gangway must not exceed 25m.
  • Enclosed Areas: Alternative means of escape and adequately maintained general and safety lighting with exit notices illuminated by both primary and secondary lighting systems must be provided to any enclosed area.  
  • Finishing the reverse of any wall over 2.3m in height that overlooks neighbouring stands in a neutral colour.
  • 2/3 of each open side must remain open and no run of walling can exceed 4m in length.
  • On stands with three open sides or less ("part-island stands") the Exhibitor is obliged to erect a dividing wall no less than 2.5m high between their stand and any other stand, and is responsible for ensuring that their Contractor leaves any such wall in a clean and finished state in one colour with no graphics visible from any adjoining stand or gangway
  •  Social distancing measures during build, break and open periods, adequate cleaning and hygiene procedures, PPE and clear communication and training plans need to be implemented to increased risks of Covid19 transmission.  Further guidelines and safety measures for our industry can be found here


Build Regulations


Please visit the eGuide to ensure that your stand fully complies with all stand construction regulations.

  • Gangway carpet and stand carpet cannot be the same colour unless the stand has a platform and then carpeted. Gangways must be clearly identifiable. 

    You must use NEC Approved tape and we would like to advise you that we currently have two NEC approved suppliers who can supply this tape:   

    Le Mark Self Adhesives  and  ISA Tape . Any charges for damage to the hall floor will be passed onto the exhibitor.

  • All construction materials must comply with the regulations stipulated in the eGuide
  • All stand structures must be completely self-supporting and stable. Direct suspension may not be made from the roof of the exhibition halls, nor may any fixing be made to the structure of the building. Nothing may be drilled, attached or bolted to the hall floor.
  • Decoration materials used for stand dressing must be flame proofed or purchased already treated by use of the appropriate chemical. Please note that artificial plants and flowers are combustible and give off toxic fumes, therefore not acceptable. Silk-type flowers are acceptable, providing they are fireproof or have been treated and marked as such.
  • Doors should open outwards in the direction of escape, those that are on a gangway should be set back so that the door doesn't intrude onto the gangway. All doors should be fitted with a vision panel of clear glazing at sight level (including for wheelchairs) giving a zone of visibility between 500mm and 1500mm above floor level. Doors should also be a minimum of 800mm
  • The permitted maximum height of a stand will be 4m, if you would like to build over this height please email the Organisers for permission.
  • Lighting rigs will be allowed provided they conform to the regulations governing their use. Here follows a synopsis of these regulations:
    •   Between 6m and 8m from the hall floor but with a minimum clearance of 2m from the highest point of the stand.
    • All structures will be rigged by the Official Rigging Contractor.
    • No graphics or decorative material may be displayed upon the lighting rig.
    • Please contact the Operations Team for more information.
  • Platforms should be avoided wherever possible, in order to provide level access to exhibits and services.
    • Where the use of platforms is unavoidable, they should not exceed 170mm in height (one step) and consideration must be given to accessibility for people with disabilities in compliance with the Equality Act 2010.
    • The distance between supporting timbers of platforms constructed from battens (25mm thick minimum) and sheet materials (plywood or MDF, 18mm minimum), must not exceed 400mm from centre to centre.
    • Platform corners must be splayed, rounded or angled to prevent sharp corners and tripping hazards.
    • Where a bevel edge is applied to the perimeter of a platform, it must be conspicuous.
    • Platforms must be of a strength and stability sufficient to carry and distribute the weight of the standfitting, stand personnel, visitors and exhibits having regard to the loading limits of floors.
    • When laying platforms on your floor space, please pay special attention to the area marked out for your stand. Failure to build to the marked out area will result in delays to the laying of the gangway carpet, and any additional costs incurred by the Organiser will be passed back to the relevant exhibitor. Please ensure your stand contractors are aware of this.
    • For more information please refer to the guidance in the eGuide
  • Ramped Access: 
    • If constraints necessitate an approach of 1:20 or steeper, an approach incorporating a ramp should be provided. 
    • A ramp must be either readily apparent or the approach to it clearly sign-posted. 
    • The gradient of a ramp flight and its going between landings should be in accordance with the table supplied in the eGuide
    • Ramps shall have a minimum, unobstructed width of 1.5m. 
    • The ramp surface must be slip resistant, especially when wet and of a colour that contrasts with that of the landings
    • A landing at least 1.2m long and clear of any door swings or other obstructions must be provided at the foot and head of the ramp.
    • Intermediate landings must be at least 1.5m long and clear of any door swings or other obstructions.
    • Intermediate landings at least 1800mm wide and 1800mm long must be provided as passing places when it is not possible for a wheelchair user to see from one end of the ramp to the other, or if the ramp has three flights or more.
    • Handrails must be provided on both sides of a ramp which has a gradient steeper than 1:20. Where it is impractical to comply with this legal obligation, a risk assessment must be provided to and approved by the organiser.
    • Where the change in level is no greater than 300mm, a ramp should be provided instead of a single step.
    • Where the change in level is 300mm or more, 2 or more clearly signposted steps should be provided in addition to the ramp.
    • All landings should be level, subject to a maximum gradient of 1:60 along their length.
    • A kerb at least 100mm high, which contrasts visually with the ramp or landing, must be provided on the open side of any ramp or landing, in addition to any guarding required.
  • Solid walls along gangways edges are not permitted. Stands must be suitably opened so as not to cause offence to neighbouring exhibitors or breach fire regulations. 
    • Walls should not exceed 4m in length or at least, 2/3 should remain open. Should you have a wall exceeding these measurements they should either have natural breaks, see-through glazed panels, at least, 1m wide or other such features at regular intervals. Each stand will be assessed individually upon receipt of drawings by the organiser.
  • Stairs, please refer to the guidance in the eGuide.
  • Stand bridging is not permitted
  • Welding will not be permitted unless a hot work permit is obtained from the Venue, subject to advance submission of a method statement and risk assessment before any work is carried out on-site.


Your stand approval is always subject to onsite inspection. A structural engineer will be on-site during the build period to inspect ALL space only stands in addition to those stands classed as complex. All complex stands must be completed by 12:00hrs on the last build day in order for the sign off to be completed and the certificate issued. For all complex structures a fee of approx.£435+vat will be charged by Roar B2B direct to you or your contractor to cover such on-site assessments and certificate costs. Please make sure that your contractor is aware of this charge in order to avoid delays in construction approval


Complex Structures

Complex structures are defined as any form of construction of any height, which would normally be designed by an engineer and/or has been found to provide significant risk via a Risk Assessment.

Submission Procedures

We must submit full details of all complex structures to the venue no later than 28 days prior to tenancy. Permission to build any complex structure will not be given until the venue has received copies of the following (written in English): 

  • Detailed, scaled structural drawings showing:
    •  Plan views of each storey of the stand/structure 
    • Sections through each storey of the stand/structure 
    • Elevations including full steelwork and staircase details 
    • Width and position of gangways within the stand 
    • Floor and/or roof loading 
    • Specifications of materials used 
    • Structural calculations 
    • Risk assessment (to include fire hazards) and method statement 
    • Written confirmation from an independent structural engineer, with adequate professional indemnity cover, that the design is safe for its purpose


 Each item of information should state the event name and stand number. Complete sets of information only should be submitted, together with a plan showing the location of the stand within the exhibition.

If any complex structure is modified after the submission of the above information, plans must be re-submitted with details of all modifications and a structural engineer’s confirmation that the final overall design is safe for its purpose.

Any stand which is a complex structure or space only stand on which large numbers of people could gather will need a fire risk assessment simply because of the escape issue.

Examples include:

  • Lighting rigs
  • Raised walkways
  • Ramps
  • Sound/lighting towers
  • Stands between 4m and 6m in height
  • Temporary tiered seating
  • Viewing/service platforms 
  • Stand designs that include a platform above floor level to which members of the public have access; including stand designs that include ramps to platforms of over 600mm
  • Stages of 600mm and over in height and all stages for public use are deemed to be complex
  • Non-standard rigged items, eg box banners made from plywood.
  • Multi-storey stands, stands with viewing/service platforms, raised walkways, sound/lighting towers, temporary tiered seating.


The organiser will obtain Certification by a structural engineer, certifying them as safe and constructed in accordance with the designer’s specification and sound and safe for their intended purpose.

Your stand approval is always subject to onsite inspection. A structural engineer will be on-site during the build period to inspect your stand. All complex stands must be completed by 14:00hrs on the last build day in order for the sign off to be completed and the certificate issued.

For all complex structures a fee of approx. £350 + VAT will be charged by Roar B2B direct to you or your contractor to cover such on-site assessments and certificate costs. Please make sure that your contractor is aware of this charge in order to avoid delays in construction approval


All electrical equipment and exhibits must be guarded to prevent accidental contact with live terminals. Items intended for use on stands must be PAT tested and labelled accordingly.

Electrical cables must not be run under carpet or up stand fitting support posts. Cables on the floor which may be walked on must be protected by conduit or with protective ramping (tape is not acceptable).

All on-site electrical work must be carried out by a qualified, competent person and inspected by the appointed electrical contractor GES, prior to energising. Testing charges will apply.

Use of the venue’s electrical sockets is not permitted and cables must not cross gangways. Once power has been energised during build-up, it will be switched off each night, including the pre-open night. If you need power overnight, you will need to order a 24 hour supply from GES

Extension leads may be used to provide multiple socket outlets.

These must not exceed 4 sockets and a cable length of 2m (uncoiled) Extension leads MUST NOT be chained together. ONE EXTENSION LEAD IS ALLOWED PER SOCKET ORDERED. The power used for appliances via the extension lead should not exceed the wattage of the power socket ordered.

Power to your stand will be switched off 30 minutes after the show closes each day and will not be switched back on until the following morning.

On the last open day, power will not be switched back on after the show closes under any circumstances, due to the hazards presented during the breakdown of stands. If you need a supply beyond this time, please arrange this with GES the electrical contractor.

All electrical installations must comply fully with the eGuide The following is a brief summary of key points:


Exhibitors own light fittings must be secured using clips or heavy-duty electrical ties and earth bonded appropriately. Light fitting flex must not be left hanging in coils or wrapped around any part of a metal structure. Cable ties must be used to secure flex to the structure.

Spotlights/floodlights/halogen lamps, etc must be guarded and mechanically fixed, so as to prevent risk of injury to persons. All lighting must be kept at least 300mm away from muslin/fabric ceilings and other combustibles. Lighting circuits must not exceed 1,000 watts. They must not be looped or connected to power circuits.

How To Order Power

Complete the Electrical Order Form and submit together with the positioning diagram and 100% remittance

All questions regarding power requirements should be directed to GES.

GES provide standard 3-pin English 13A socket-outlets, but with four different power ratings. The list below indicates the type of equipment that can be used with each of the power ratings:

  • 500W Socket is rated at 2AMP and can supply the following: One computer [or 2 x laptops]
    • A small domestic fridge
    • Four mobile phone chargers
    • Table lamp
    • Television and video or any combination of the above using a single 4-way extension (maximum length 2m) subject to a total load of 500W


  • 1000W Socket is rated at 4 AMP and can supply:
    • Small domestic coffee machine (750W – 1kW)
    • Small domestic steamer (900W – 1kW)
    • Small microwave cooker (750W – 1kW)


  • 2000W Socket and 3000W Sockets are rated at 10 AMP and 13 AMP and can supply:
    • Jug Kettle (2kW – 3kW)
    • Catering coffee machine (1.5kW – 3kW)


The list indicates individual items that can be used with each socket, with the exception of the 500W socket above. All sockets are supplied on daytime power only unless 24-hour continuous power is requested and quoted for.

Actual power requirements will vary dependent upon the  individual equipment  used.  All electrical  equipment has a Rating Plate that shows its power consumption in Watts (W) or kilowatts (kW). You should carefully examine all equipment to be used  and  calculate the  exact  power usage  AND  the positioning  of electrical items on the stand before ordering your electrical power requirements.

Additional power requirements ordered onsite will incur a 20% surcharge on the standard rate

Exhibitors MUST provide a positioning diagram showing the required position of sockets / lights. Should electrical items installed by GES require moving onsite a fee of £30.00 + vat per item moved will be charged.

Exhibitors requiring a main only supply with a cee form connection for machines or own distribution should contact GES directly for a quotation.

* Island sites will require an independent main supply as per venue regulations. Order Form socket prices do not apply to stand alone / island sites. Please contact GES for a quotation 

Floor Covering

Space only stands do not include floorcovering and exhibitors must make their own arrangements. Please see the Floorcovering section  for suitable options.

The Exhibitor will be responsible for any damage to the floor coverings, in or around the stand. Any damage caused to the carpet by an exhibitor or their contractor will be replaced and the cost of replacement charged to the Exhibitor.

On Site 

It is imperative you ensure and adhere to the allocated build slots sent to you in advance. It is your responsibility to manage your build and look after your staff on site.

The event gangways have been changed to accommodate the social distancing Government guidelines. The event scheduling and Space Only stand categories  will also support these important guidelines. It is your responsibility to help us make this work to ensure the success of the event.

Social distancing and cleaning are the most important elements to reduce the potential spread of Covid 19.

Based on the stand area, it is your responsibility to work out how many people you can have working on the stand at any one time. It is also important staff when on site should be on the stand. Very limited neutral venue space is available for staff waiting to gain access to the stand. Clear and effective communication systems must be adopted to help meet this issue. We suggest staff us their vehicles as safe areas when waiting or resting and are then in communication with the stand manager by mobile phone for updated instructions.

ALL personnel working on site must phone into their manager in advance to inform them they are fit and well with no apparent symptoms of Covid 19 and are ready for work. It is the stand managers responsibility to ensure the staff are safe and well. Checks on site will be made by security and medical personnel. Any person found to be working on site with Covid 19 symptoms will be asked to leave immediately and potentially the stand closed and secured until it has been thoroughly cleaned and all staff checked. A health delay like this would jeopardize the stand being allowed in the halls and any financial implications will not be the fault of the organiser or venue.

Use floor markings to delineate 2m distance. Suggest one-way routes to access and egress the stand area. Ensure a dedicated individual is tasked with monitoring and managing the staff and working area.

Ensure all staff have dedicated work equipment i.e. their own drills, ladders etc. For materials being handled, we would suggest a scheduled works programme to reduce multi handling supported by gloves. It is your responsibility to reduce cross contamination on the stand while it is being constructed.

Ensure you have an adequate supply of antiviral liquid, cleaning cloths etc for an effective and periodic clean of work equipment etc

We would suggest you choose materials, work surfaces, chairs etc that can be easily and effectively cleaned regularly. This includes door leavers instead of doorknobs so people can open doors using elbows etc, touch screen versus keyboards etc.

Please note that:

  • Checks will be made on arrival to ensure that you are complying with, or intending to comply with, the contents of these instructions.  
  • Movement around the venue from your stand should be kept to a minimum and direct from A-B and back with no other interaction with others, unless that is your purpose. If so, that interaction should ONLY be for reasons of operational necessity, i.e, ordering services or organiser queries, and 2m social distancing MUST be observed. Whenever moving around the venue off your stand or engaged in the interactions described above, face coverings MUST be worn.


Effective cleaning will eliminate / reduce the virus spread on your stand. Ensure you have an effective cleaning strategy.

This will be an important element of the stand and work activities. We suggest you read the link below to see how it works best for you and your staff.

Government advice on cleaning of a non healthcare settings

PPE. (Personal Protective Equipment)

PPE use should be a last resort and only considered when every other forms of control have been considered and implemented.

Face masks: Face masks are compulsory within the venue unless there is a medical exemption.  Masks should be the correct specification, FFP2 or above. These when fitted and worn correctly, changed frequently, removed properly and disposed of safely will protect the wearer from contracting the virus. Poor management and training has the potential of creating a false sense of security and a spread of the virus.

Gloves: These should be removed and replaced frequently as gloves will transmit the virus if the wearer touches their face. Best practice would be all staff are trained in wearing gloves. Hand washing is carried out pre and post wearing gloves. It is vital gloves and either bagged and thoroughly washed or carefully disposed of.

Other PPE: As the virus can enter the body through eyes, nose, mouth and in some cased cracked skin, cuts etc. It is vital your risk assessment identifies the risks which may lead to full face masks, aprons, over garments i.e. boiler suits etc. are considered.


Social Distancing

Your risk assessment is vital in identifying the risks for you and your teams when working.

It is your responsibility to protect all persons under your control and other third-party person’s working close to you.

Social distancing is one of the control measures to reduce the spread of the virus. Based on Government guidelines, there should be a minimum 2-meter gap between people. IF this was not possible, then for a short period of time with additional control measures being used i.e. screens, masks, gloves etc, the distance can be reduced to 1m. When this happens, this must have been identified and written into your risk assessment.


Vulnerable People

In some cases, certain people may be extremely vulnerable to the virus. These vulnerable people are identified under government guidelines. It is your responsibility to ensure you identify any vulnerable people working and ensure they are protected from catching the virus. In some cases you may consider the risk to the individual is too high and consider not having them on site. Clear supportive communication must be had with all your teams working on site to support them in these delicate challenging times. No peer pressure on individuals should happen thereby increasing their risk and potential mental health impact.


Happening on the 15 – 16 November at the London Olympia

Experience the future of medical imaging, over 2 unmissable days, meet face to face with industry leading experts, gain CPD points, Network, exchange ideas and learn from thousands of other specialists in your field.